Yes, EzTiles can resist temperatures of up to 120 degrees celcius.

EzTiles is designed for wet areas. It has perforations and drainage system which allows water to quickly flow through the tile leaving a clean, dry, and safe surface.

EzTiles are resistant to almost everything except for battery acid. Make sure to keep away from direct heat sources such as butane torches.

Yes, EzTiles can be easily cut using any type of electrical saw with a fine-toothed blade (table saw, circular saw, reciprocating saw, jigsaw etc.) to your specific installation needs.

Our EzTiles are built to withstand a considerable amount of weight. Depending on the weight of the vehicle, we may suggest using a rigid piece of material or ¾ inch plywood between the jack stand and tile to distribute the weight to eliminate any possible damage. Even thou they can with stand 70000lbs of roll overweight and 3120psi of compression tests if the weight is totally distributed to one area the tile may crack.

No, EzTiles are fade-resistant due to our UV Stabilizer mixed into the material as well as the color pigments, making them highly fade resistant and non-slip.

Yes, the channel system underneath our tiles allows them to have “bounce” providing anti-fatigue properties. Companies even use them in their facilities as flooring to provide comfort when standing for hours at a time.

Yes, the easiest way is by using a paint can opener, you will be able to pop out a single tile from the middle without affecting the rest of the floor.

Yes, toolboxes can roll with ease over Eztiles.

Yes, EzTiles is easily and quickly installed by the end user. They simply snap together without the need of any tools. If you wish you may use a rubber mallet however it is not necessary. This is the added beauty over doing epoxy amongst many other disadvantages.